Description
Option 1 is the Porsche 924/944 early pre 1985 Dash Cover. Right hand drive, or left hand drive available at £125 each.
Option 2 is the Right hand drive 944 complete S2 or 968 dashes also available priced at £375, a great weight saving for a race car, or to update the early 924 dash, add your 3 clocks to the S2 dash.
Supplied in brown or black( email or call us to state which colour you want).
The left hand drive version has the speaker hole to add your grill to, right hand drive does not have the speaker hole. Simply remove the vent from the centre of the dash which on very, very early cars housed a speaker.
Then fit the dash cover over your cracked dash. Cars with speakers in the doors will notice when removing the centre grill no speaker is actually there!
The Dash cover is attached using polyurethane adhesive (not supplied) Toolstation/ B&Q/ Ebay sell this for around £5 for a tube. Some people use Velcro to attach as another option.
Saves the vast labour cost of removing the original dash to repair or replace.
It’s easy to install also no dismantling is required.
The 924 model had the more square shaped dash with three clocks behind the steering wheel, 944 model Porsches shared the same dash until mid 1985 when the later dash was introduced. This is easily recognised as there is 5 clocks behind the steering wheel in these models.
All Carbon fibre panels are white or black gel coat finish, which is paintable. We use a thin layer of tissue mat so that the weave is not visible through the outer skin of the panels. Our carbon fibre is made for strength not looks.
We manufacture and stock a large range of panels for most Porsche models. We also stock new and used parts.
Porsche specialists with over 40 years experience. We can carry out Restorations, Repairs, Rebuilds, Servicing and more.
Knowledge of properties of GRP/CFRP is required for correct installation of these body parts. By purchasing these parts you accept that they may require minor adaptation/modification/trimming to fit. Mounting kit and fitting instructions are not included. No additional equipment is included such as stop or fog lights/grills/badges, unless otherwise stated in the description above. Parts require professional fitting. Parts need to be trial fitted before priming and painting in order to check fitment and eventual necessary modifications. Parts are not finished and they must be prepared before priming (sanding/filling/priming).
All carbon fibre panels are white or gel coat finish, which is paintable. Our Carbon Fibre is made for strength not looks.
